Stove Writeup Final

After half a dozen or so tests I have found a simple aluminium stove combination which works nicely.

- Drill three 2mm holes clustered towards the centre of one half
- Use a 0.8mm drill bit to drill the jet holes - I have been drilling about 10 in a pattern which is optimised for using a kidney cup for cooking
- Cut both cans to about 2.5cm height
- To ensure it fits together nicely put two large creases in the can that fits on top - at the top of these creases drill a small hole to prevent pressure build up

All going well I'll be testing these stoves out at Lerderderg Park in a weeks time.